|
Post by patmarlin on Dec 2, 2015 9:18:14 GMT -7
So glad to see this new place! I'm in full support. Will be creating a link from my website to here for everyone! Pat ...
|
|
|
Post by Junior on Dec 2, 2015 9:21:56 GMT -7
Thanks Pat. Good to see you here. Jr.
|
|
urny
Bullet Head
Posts: 39
|
Post by urny on Dec 2, 2015 9:23:50 GMT -7
I'm happy to see this new forum, and hope to participate from time to time. Thanks for starting this up.
|
|
|
Post by patmarlin on Dec 2, 2015 9:34:31 GMT -7
|
|
|
Post by Junior on Dec 2, 2015 9:52:56 GMT -7
Thanks Pat. I'm claiming credit for the forum since I did most of the work building it, lol.
|
|
|
Post by Bullshop on Dec 2, 2015 10:44:51 GMT -7
Hi Pat and G'Day all! I wanted a place where I could ramble and hopefully share the content of my head before it is lost. I also want this to be a good source of information for the use of our products. I hope to eventually list the very extensive compilation of load data I have developed for our extensive bullet line over many years. I especially wanted a place where I could actually voice ""MY OPINION"" and not be asked to leave, a place where public opinion is allowed. My thanks go to Jr. for creating this place. Now he is the only one I have to stay on the good side of.
|
|
|
Post by patmarlin on Dec 2, 2015 11:07:59 GMT -7
OK- JR's got the reins and technical director.. ha!
So glad to hear from you guys.
So nice to have a fun place to come to for a change an discuss our hobby, and as Daniel may have eluded to- and not get attacked or made to feel uncomfortable.
I remember when a place just like this started, and it was a great place to visit. What happened there? I have no idea.
|
|
|
Post by cz93x62 on Dec 2, 2015 12:39:14 GMT -7
This is nice, Dan & Dan. Looking forward to further discussion of our favorite pastime.
|
|
|
Post by scootershooter on Dec 2, 2015 12:52:29 GMT -7
Good to be here, already recognise a few!
|
|
|
Post by Junior on Dec 2, 2015 12:58:10 GMT -7
It's taking off faster then I thought it would. As I said before, if anyone has anything they think I should change, or features that you want to see just let me know.
|
|
|
Post by patmarlin on Dec 2, 2015 13:03:35 GMT -7
Here's one JR...
When I get a email notice that someone has posted on a thread, there's no link. May be a limitation to the software. Maybe, I don't have the correct notification selected.
|
|
|
Post by Junior on Dec 2, 2015 13:44:24 GMT -7
That's a good one pat. I'll look into it tonight.
|
|