|
|
Post by Bullshop on Jan 15, 2016 14:18:33 GMT -7
We just added another 25 cal design a 65gn plain base. I will try to get a picture up soon. This should make a good small game bullet at 22 LR velocities.
|
|
|
|
Post by missionary on Jan 16, 2016 11:53:27 GMT -7
Greetings
If it has a flat nose it will sure do the job.
|
|
|
|
Post by Bullshop on Jan 16, 2016 13:56:58 GMT -7
Yes it is a flat nose with a wide meplate, maybe too wide. I found that with this bullet and my RCBS dies I can seat the bullet with the seating stem removed from the seating die. The meplate is wide enough that it is catching the die body and being seated. This became a real problem when trying to get some crimp because even with the seating stem out adjusting the die in for more crimp keeps seating the bullet in farther.
My solution was to get a Lee factory crimp die and crimp separately.
I have no idea if this will be a problem with other dies but be aware that it might. Not a problem if you don't need crimp but with some powders you get a more consistent uniform burn with some crimp.
|
|
